In case you haven’t had the pleasure of a smooth back shave in a while due to reasons like underperforming blades or areas too far to reach, Bro has got your back covered.
This Bro Shaver 3 review will give you insight into this classic yet effective back shaver that comes with a 20 inch long handle and a 3.7 inches wide blade head.
With this combination, you’ll be free to reach any part of your back and generate the smoothing possible shaving outcome.
There are certain downsides to this along with tons of benefits – stay tuned till the end to learn about both of these!
“BRO Back Shaver 3.0 is an unconventional yet brainless solution to your back shaving – letting you reach difficult areas without twisting yourself out and complete the job faster than most other tools for the job!”
Unboxing the BRO SHAVER 3.0
Bro Shaver 3.0 will arrive at your doorstep inside a rectangular package that’s slim and quite robust – enough to keep everything inside safe.
There’s not much going on inside. The handle is split into two parts and you’ll have to put it together with a click in the middle, fitting one part with the other through the hinge.
You’ll also receive a pack of 5 Bro blades which match the width of the blade holder – both equating to 3.7 inches.
What’s Inside the Box: Bro Shaver 3.0, a 5-Pack Bro Safety Blades, User Manual.
Specifications: BRO Backshaver 3.0 for Men
Here are the technical specifications for the BRO Shaver 3.0 that gloss over some of the details essential for understanding this device.
- Handle Length: 20 Inches
- Blade Width: 3.7 Inches
- Weight:
- Colors: 1 (Ashen Blue & Pale Orange)
- Blade Type: Wide Stainless Steel Safety Blades
- Handle Material: Plastic with Silicone Grip
- Washable: Yes
- Closeness Settings: 2
BRO SHAVER 3.0 : Things There are to Know
I’ll go through the things you are supposed to be knowing about the BRO back shaver 3.0 to gain a better insight.
How to Install Bro Shaver 3.0: Step by Step
Firstly, you’ll have to install the Bro back shaver as the handle comes detached in two parts. Grab both of the segments and locate the connector at each end.
Then, match the socket alignment and simply push one end into another. A click will tell you it has been fastened.
As per the blade installation, you’ll have to unscrew the two bolts and uncover the guard. Place your blade following the screw guides, matching the blade holes for a perfect setup.
Once the blade is in place, you can put the guard back in its place and secure the bolts on the screws. Make it tight, but not too tight.
Acceptable Grip & Design
The design doesn’t seem like something ecstatic but you cannot deny the practical charm the Bro Shaver 3.0 has to offer.
While the handle material or the guard itself are made with durable plastic, the gripping area contains an ergonomic texture crafted with silicone.
Although it’s not the most comfortable gripping solution, it surely is an effective one both in dry mode and in wet.
DIY Build Quality
If you didn’t know already, the BRO project is actually a DIY build up that has a home factory set up to produce these tools.
The DIY aspects can be discerned if you pay close attention to the details. Current DIY build standards are actually high and it seems to be working for BRO as well.
I found no chance of corner breakage or jeopardizing integrity. BRO seems to have solid quality control despite their range of operation.
Lighter Weight
As you can expect, the hollowed out plastic handle paired with ultra thin safety blade is not supposed to add much weight to the entire thing.
With the detachable handle design and such a weight class, this back shaver is remarkably portable given that it has the longest handle in this category of grooming.
If you’re having to perform longer grooming activities in twisted angles, it’s not going to wear you down – that much I can tell you.
Wide, Sharp Safety Blades
BRO provides singular units of ultra-wide, 3.7 inches stainless steel safety blades to fit perfectly inside the holder.
Since these blades are dual sided, you can easily flip it around after a couple of shaves to make the most out of it. One blade usually lasts for around 4-6 full back shaving sessions.
If you’re not willing to buy the BRO blade, you can make do with regular safety blades but in order to match the width, you’ll have to use three at the same time instead of one.
I can tell you this much, using three blades together can compromise the safety aspect whereas it can save you tons of money – so pick one which is of higher priority to you.
Plastic Guard for Safety
In case you’re wondering whether the direct skin to blade contact might tear your skin open, BRO has provided a solution for you.
The vibrant, orange, textured material on the blade head is a plastic guard aimed at reducing blade contact at awkward angles.
This situates the blade in such a way that your skin finds added layer of safety from accidental cuts and ingrown hair.
2 Closeness Settings
In the BRO back shaver 3.0, there are two closeness settings you can settle for – (M) Mild and (S) Spicy.
It is ensured by the guard orientation – one way it’s placed by creating a gap between your skin and the blade, and the other way it gives you a much closer shaving action.
You can determine it by having a closer look at the orange guard. There are embossed texts of (M) and (S), the upward placement ensures the blade is activated for that particular length.
What I Like
- Lightweight and durable handle with ergonomic grip
- Can be easily installed
- Safety guard keep your skin protected
What Could be Better
- Altering between (S) & (M) settings requires some time
My Experience with BRO SHAVER 3.0
Since I’ve used the BRO Shaver 3.0 to shave my back quite a few times, I should share my experience to give you a realistic idea.
Shaving Closeness
The closeness of Bro Shaver 3.0 is almost unmatched by any other tool, except for the Bakblade 2.0 back shaver.
Using the safety blade that’s very thin and agile, no texture or density of hair can stand their way and has to give in from the very roots.
The outcome is a silky smooth back skin with no tangible hair growth. This is one of the largest charming factors for the Bro Shaver 3.0.
Skin Safety
While Bro Shaver excels at closeness, it’s equally risky in terms of skin safety. I’ve experienced cuts here and there, not to mention the burning sensations.
Spicy setting leaves your skin prone more to such factors, although it gives the closest possible outcomes in return. Mild setting seems like a middle ground, yet the treats are not mitigated entirely.
What I do is apply ice packs or rinse my back with cold water as soon as the shaving session is completed. Also, applying moisturizer on the shaved area tends to nourish the skin after those harsh cutting actions.
Speed of Shaving
Since BRO shaver cuts directly to the chase and works from the hair roots, the efficiency is definitely commendable.
That said, you’ll have to proceed with short strokes to ensure the particular region is fully shaved and at the same time, reducing the threat of accidental cuts.
In dry mode, the shaving time is much faster as wet shaving tends to clog up the blade and require frequent rinses to regain the cutting prowess.
Maneuverability
With a lightweight handle, fine balance and somewhat grippy handle, maneuvering the Bro Shaver around has not posed any problems for me – although you have to know how to properly do that.
I wouldn’t recommend using it with the handle detached since it can compromise the weight and leave your skin prone to uneven pressure, leading to cuts or tugs.
The handle is long enough for butt shaving, but the delicate skin there is not ideal for handling such sharp blades, therefore I’d say it’s better to leave that particular task to other specialized tools.
Dry or Wet Shaving?
The perks of dry back shaving is it’s fast and efficient – and that’s about it. Otherwise, shaving like this causes irritation frequently, creates a stray hair mess and overall discomforting for the skin.
For wet shaving, you can easily stand under the shower and go your way about it, but as mentioned earlier, the blade needs to be rinsed frequently.
But this mode is much safer and convenient, also the results seem slightly closer than dry. If you have the time, I’ll say wet shaving has safer outcome potential than dry.
Cleaning & Maintenance
To clean out the BRO Shaver 3.0, you’ll have to unscrew the shaver head and remove the blade along with the guard.
Then, the easy and more convenient method is to rinse all of it under running water as separate entities, it gets everything removed within mere seconds.
Otherwise, you can employ a cleaning brush to collect the stray hair and dunk everything out, but it’s not the most thorough cleansing method.
For the blade, you should use an alcohol pad or other antibacterial liquid with clean cotton to mop the blade teeth. It’s to protect your skin from infections or bacterial growth.
How I Tested the BRO SHAVER 3.0?
I’ve tested out the Bro Shaver 3.0 on my own back as I’m blessed (or cursed) with an ape-like growth all over my body.
To push its limits, I’ve tried both the Mild and Spicy settings, opted for aftermarket blades and assessed the average shaves a blade unit or set can handle.
Also, the handle, guard and grip point went through scrutiny in terms of quality inspection and pressure resistance.
Finally, after months of use, I have gathered sufficient data to offer my verdict on different areas of this Bro unit.
What I Like
- Delivers some of the closest back shaving outcome
- Efficient across different hair textures and coarseness
- Wet shaving feels more comfortable than dry
What Could be Better
- Leaves your skin prone to cuts or irritation
- Not a versatile tool – caters only to back shaving
Who is BRO SHAVER 3.0 For?
Well, the BRO Shaver 3.0 is meant to be used like gorilla growth on the back – individuals like myself should find it highly useful and functional.
It’s able to reach distant areas with ease and strokes at the right angle offer a satisfying removal. Also, those who want to shave with lotion or gel have the option to do so.
You can buy it for your male partner as a gift and even help them clean up their back, down to the level of a soothing smooth outcome.
Also, consumers should consider the blade replacement frequency because in my opinion, the BRO Blades are not very durable.
FAQ
Let me very quickly answer a couple of questions concerning the Bro Shaver 3.0 and its unexplored territories by the netizens.
Q: Is the BRO Shaver 3 easy to use?
Ans: Yes! Using the Bro Shaver 3 is actually very easy and intuitive. You’ll still need to allow your skin some time to get used to such cutting actions and some experience with it until you figure out how to glide past your skin contours. The only difficult place would be to shave your shoulder and it might be best to employ a separate tool for that area.
Q: Does the BRO Shaver 3.0 have a battery?
Ans: No! Bro Shaver 3.0 is a totally traditional device that relies on manual, safety razor blades that are just wider than usual. There’s no motor, no electronic component and no advanced tech incorporated – you’ll have to rely on your steady hands and a few techniques to squeeze the most out of this instrument.
Verdict
Honestly, BRO Shaver 3 review today has uncovered that there’s no secret trick behind its success in making back shaving easy – rather it’s refining two of the most basic things – extending the arm and widening the blade.
BRO 3.0 used to be much affordable back in the day. Due to growing demands and its performance, the brand has spiked the price, both for the handle and the blade replacement.
Still, it’s priced less than the other competitors, although I’m not entirely happy with their initial price increase – but I guess that’s consumerism for you.
Would I recommend it? Most certainly! Because Bro Shaver 3.0 has created a dependency for me when it comes to regular back shaving – the most traditional way interpreted under a new, more effective light!
| Score | |
| Build Quality | 4.7 |
| Arm Reach | 4.9 |
| Blade Width | 4.9 |
| Storage | 4.7 |
| Cleaning | 4.7 |
| Resupply Cost | 4.6 |
| Overall | 4.75 |
| Verdict
Bro Shaver 3.0 stands a unique back shaver with a 20” arm and 3.7” wide blade head, with (S) and (M) settings for changing the expected closeness. Its handle is light, ergonomic and can be used under the shower, followed by easy cleaning and maintenance. |
|