Did you know that missing out on important maintenance routine of your electric razor can damage the individual properties of the device?
Also, following a healthy routine has the potential to enhance durability and cut down on subsequent cost of replacement parts.
This maintenance routine is quite easy to master and doesn’t take too much time out of your daily life.
So, let’s buckle up and learn how to take care of your electric razor by following 8 important yet straightforward routines!
Different Maintenance Routines for Your Electric Razor
Here, let me discuss the maintenance routines for your electric shaver. You’ll see that separate purchases aren’t a necessity to fulfill most of these.
Daily Maintenance Routine
For daily groomers, there are certain things you must apply to your electric shaver to keep it in mint condition. This is applicable for both premium and affordable devices!
- Remove stray hair from the blades after every session. Use a brush for better efficiency.
- If your razor is waterproof, wash it under water.
- Let it dry out before storage.
Weekly Deep Cleaning
Apart from daily cleansing, there are certain things you should practice on a weekly basis to enhance the shaving experience.
- Primarily, you should have the understanding of disassembling your electric shaver.
- Remove the shaver head and rinse it in lukewarm water (if washable). Do the same for the cutters as well.
- For non-waterproof devices, dip a cloth rag in warm water and mop up the foils, rotary units or blades.
- There are efficient spray cleaning solutions you can consider for both wet and dry shavers.
- Reassemble everything and test if things are in order once completed.
Lubrication
Lubrication prevents friction between the cutting elements and even the rapid torque inside the motor unit. By applying proper lubrication, you can reduce wear over time and generate a smoother shaving experience!
- After each shaving session, apply a couple drops of lubricating agent on the foil meshes.
- If you have a rotary razor, apply a single drop on each of the rotary heads.
- Additionally, two more drops on the blades underneath is deemed optimum.
- If your motor allows lubrication, two drops there should suffice.
Replacing Parts Regularly
Replacing the worn parts of your electric shaver regularly is of utmost importance. If you’re running a worn out part, it will not only cause discomfort while shaving, but also damage the relatively healthier parts due to its lack of efficiency.
- You have to identify the signs of wear for your shaver parts. Blades and foils are the ones replaced most frequently.
- Secondarily, battery units tend to lose health over time, so that becomes a concern if you see it holding much less juice than it used to.
- Otherwise, the motor unit or any other internal part replacement must be done by an expert.
- The frequency of replacement may vary from one brand to the next. A rule of thumb dictates that you have to replace the blades and foils every 12-18 months.
- Some brands sell the entire shaver head for replacement, while others sell the blades or foil elements separately.
- Blade replacement is quite easy: pull off the blades from the handle where the springs are connected and put back the new blades in the same place.
- If your razor has its blades connected beneath the foils or rotary heads, you should notice a rotational sign to release the mechanism. The new blades should fit in with one press and a clicking sound for confirmation.
Storing Your Electric Razor Properly
Among the must-have electric razor accessories, a safe storage case is definitely among the top priority products.
- These cases can be compact, made with leather, or a large one built with durable material.
- Ideally, a shaver case as such should be airproof so that there’s no rust formation in the storage period.
- Also, robust yet lightweight storage cases allow you travel with your electric razor with zero concern.
- Some models of Braun Series 9 come with a rechargeable case, keeping your device safe as well as fully charged while it’s stored!
Battery Maintenance
While modern li-ion batteries rarely face trouble within the first 3-4 years on an electric razor, proper cycles can enhance that by preventing permanent damage in a number of ways.
- Do not let your razor fully die out, meaning, stop using till its last drop of battery.
- Don’t overcharge your battery even if it has surplus charge protection.
- Maintain a healthy charging cycle depending on your shaving frequency.
- If you’re not using your electric razor for a long time, drain the battery completely before storage.
Using Built-in Cleaning Stations (If Applicable)
Many electric razors these days come with a built-in cleaning station, or at least a charging dock. These variants may cost a little extra, but trust me, it’s worth it for your product’s durability!
- A cleaning station will not only keep your device charged, but also clean and lubricate the device based on industry standard – and of course, it’s fully automatic.
- Only downside is the cost of the cleaning agent, so it’s usually considered by professional consumers.
- With a few tricks, you may make these refills last longer and cost yourself less money in the long run.
Troubleshooting Common Issues
Your electric razor can run into tons of different issues and the experience is not going to be the same for everyone. If your shaver poses a problem, it’s better to triangulate the source of the issue first.
- Razor Pulling or Tugging: Generally, it means your foils or blades are worn off. Still, try fully recharging the device, cleaning and lubricating the cutting elements. If the problem persists, you’ll have to replace your foils and blades.
- Motor Making Weird Noise: Weird noises are usually caused by clogged blades, non-lubricated cutting elements or motors. A thorough cleansing, lubrication and complete recharge will help you isolate the common issues. Other than these, the motor could be malfunctioning and in that case, you have to claim warranty or visit a professional.
- Razor not Turning on: If your electric razor isn’t turning on, start by replacing the charging adapter or the charging stand (if any). Should this not fix your trouble, it could be a battery or a motor issue and this too can be solved by an expert.
So, the 8 important steps of properly taking care of your electric shaver are fully covered until this point.
There can be additional procedures for a better razor life expectancy, but the mentioned 8 are the most essential and easy to perform!
FAQ
While we’re on the topic, let’s discuss a few commonly asked questions related to electric razor maintenance.
Q: Can I use disinfectant or alcohol to clean my razor?
Ans: Yes! You are allowed to use a disinfectant or alcohol to clean your razor but it’s better if the solution is meant for applying on an electric shaver. If you’re planning on using general alcohol based disinfectants, that can work too but make sure to dry out your razor before storing it.
Q: What happens if I don’t clean my razor regularly?
Ans: If you don’t clean your razor regularly, a number of things can happen. For instance, your blades will get clogged, cutting efficiency will be reduced, you might experience frequent tugs or pulls, and in the worst case scenario, your skin can get prone to infections.
Q: How do I prevent rust on my electric razor?
Ans: Rusting foils and blades is a scary yet realistic factor groomers cannot deny. The solution is very easy – let things dry out before storage and keep it in an airtight container. These two along with proper lubrication will most certainly prevent rust on your electric razor!
Q: Can I share my electric razor with someone else?
Ans: Well, you are free to share your electric razor with anyone, but it’s not advisable at all! Because everyone has their own skin situation going on and your electric shaver gets very intimate with the skin during shaving. There’s always a risk of spreading germs or skin infection through this interaction. But if you must, make sure to properly clean and disinfect the shaver after the need is fulfilled.
Final Thoughts
So, I’ll highlight three lessons from our discussion on ‘how to take care of your electric shaver’ article today.
Clean regularly, replace parts frequently and store properly. These three principles are the foundations of a healthy electric razor maintenance routine.
The benefits definitely outweigh the effort you’ll have to put behind these maintenance phases as these will enhance your razor’s durability and improve the shaving experience.
So, start implementing these today and reap the seeds of your hard work in the near future!